Halogenated aromatic pollutants in routine animal-derived food of south China: Occurrence, sources, and dietary intake risks.

Halogenated aromatic pollutants (HAPs) including polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), polychlorinated biphenyls (PCBs), polybrominated dibenzo-p-dioxins/furans (PBDD/Fs), and polybrominated diphenyl ethers (PBDEs) exhibit diverse toxicities and bio-accumulation in animals, thereby imposing risks on human via animal-derived food (ADF) consumption. Here we examined these HAPs in routine ADFs from South China and observed that PBDEs and PCBs showed statistically higher concentrations than PCDD/Fs and PBDD/Fs. PCDD/Fs and PCBs in these ADFs were mainly from the polluted feed and habitat of animals, except PCDD/Fs in egg, which additionally underwent selective biotransformation/progeny transfer after the maternal intake of PCDD/F-polluted stuff. PBDEs and PBDD/Fs were mostly derived from the extensive use of deca-BDE and their polluted environments. Significant interspecific differences were mainly observed for DL-PCBs and partly for PBDD/Fs and PBDEs, which might be caused by their distinct transferability/biodegradability in animals and the different living habit and habitat of animals. The dietary intake doses (DIDs) of these HAPs via ADF consumption were all highest for toddlers, then teenagers and adults. Milk, egg, and fish contributed most to the DIDs and risks for toddlers and teenagers, which results of several cities exceeded the recommended thresholds and illustrated noteworthy risks. Pork, fish, and egg were the top three risk contributors for adults, which carcinogenic and non-carcinogenic risks were both acceptable. Notably, PBDD/Fs showed the lowest concentrations but highest contributions to the total risks of these HAPs, thereby meriting continuous attention.

Tunable polarization properties of charge, spin, and valley in Janus VSiGeZ4 (Z = N, P, As) monolayers.

Polarization, as an important characterization of the symmetry breaking systems, has attracted tremendous attention in two-dimensional (2D) materials. Due to their significant symmetry breaking, Janus 2D ferrovalley materials provide a desirable platform to investigate the charge, spin, and valley polarization, as well as their coupling effects. Herein, using first-principles calculations, the polarization properties of charge, spin, and valley in Janus VSiGeZ4 (Z = N, P, and As) monolayers are systematically studied. The mirror symmetry breaking leads to a non-zero dipole moment and surface work function difference, indicating the presence of out-of-plane charge polarization. Magnetic properties calculations demonstrate that VSiGeN4 is a 2D-XY magnet with a Berezinskii-Kosterlitz-Thouless temperature of 342 K, while VSiGeP4 and VSiGeAs4 have an out-of-plane magnetization with a Curie temperature below room temperature. The magnetization can be rotated by applying biaxial strain, allowing manipulation of the spin polarization via nonmagnetic means. The spontaneous valley polarization is predicted to be 46, 49, and 70 meV for VSiGeN4, VSiGeP4, and VSiGeAs4, respectively, whose physical origin can be elucidated by employing the model analysis. In particular, the biaxial strain can induce the valley polarization switching from the valence (conduction) band to conduction (valence) band, but it hardly changes the valley polarization strength. Meanwhile, the valley extremum is transformed from the K' (K) to K (K') points. The present work not only provides an underlying insight into the polarization properties of Janus VSiGeZ4 but also offers a class of promising materials for spintronic and valleytronic devices.

Exploration in the Mechanism of Ginsenoside Rg5 for the Treatment of Osteosarcoma by Network Pharmacology and Molecular Docking.

OBJECTIVE: Osteosarcoma is a primary malignancy originating from mesenchymal tissue characterized by rapid growth, early metastasis and poor prognosis. Ginsenoside Rg5 (G-Rg5) is a minor ginsenoside extracted from Panax ginseng C.A. Meyer which has been discovered to possess anti-tumor properties. The objective of current study was to explore the mechanism of G-Rg5 in the treatment of osteosarcoma by network pharmacology and molecular docking technology. METHODS: Pharmmapper, SwissTargetPrediction and similarity ensemble approach databases were used to obtain the pharmacological targets of G-Rg5. Related genes of osteosarcoma were searched for in the GeneCards, OMIM and DrugBank databases. The targets of G-Rg5 and the related genes of osteosarcoma were intersected to obtain the potential target genes of G-Rg5 in the treatment of osteosarccoma. The STRING database and Cytoscape 3.8.2 software were used to construct the protein-protein interaction (PPI) network, and the Database for Annotation, Visualization and Integrated Discovery (DAVID) platform was used to perform gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses. AutoDock vina software was used to perform molecular docking between G-Rg5 and hub targets. The hub genes were imported into the Kaplan-Meier Plotter online database for survival analysis. RESULTS: A total of 61 overlapping targets were obtained. The related signaling pathways mainly included PI3K-Akt signaling pathway, Proteoglycans in cancer, Lipid and atherosclerosis and Kaposi sarcoma-associated herpesvirus infection. Six hub targets including PIK3CA, SRC, TP53, MAPK1, EGFR, and VEGFA were obtained through PPI network and targets-pathways network analyses. The results of molecular docking showed that the binding energies were all less than -7 kcal/mol. And the results of survival analysis showed TP53 and VEGFA affect the prognosis of sarcoma patients. CONCLUSION: This study explored the possible mechanism of G-Rg5 in the treatment of osteosarcoma using network pharmacology method, suggesting that G-Rg5 has the characteristics of multi-targets and multi-pathways in the treatment of osteosarcoma, which lays a foundation for the follow-up experimental and clinical researches on the therapeutic effects of G-Rg5 on osteosarcoma.

Organophosphate esters (OPEs) in a heavily polluted river in South China: Occurrence, spatiotemporal trends, sources, and phase distribution.

In the past decade, organophosphate esters (OPEs) undergo rapid increase in production and use. Meanwhile, owing to their additive property, OPEs exhibit liability to escape from related products and therefore ubiquity in various environments. Moreover, numerous researches verify their bioavailability and negative effects on biota and human, hence their occurrence and associated risks have caught much concern, particularly those in aquatic systems. So far, however, OPEs in water are generally investigated as a whole, their phase distribution and behavior in waterbodies are incompletely characterized. We examined 25 OPEs in water (including dissolved and particulate phases), sediment, and sediment core samples from the Lian River, which flows through the Guiyu e-waste recycling zone and Shantou specific economic zone in South China. Compared to most global waterbodies, the Lian River showed high or ultrahigh OPE levels in both water and sediments, particularly in the reaches surrounded by e-waste recycling and plastic-related industries, which were the top two greatest OPE sources. Non-industrial and agriculture-related anthropogenic activities also contributed OPEs. Sediment core data suggested that OPEs have been present in waters in Guiyu since the 1960s and showed a temporal trend consistent with the local waste-recycling business. The phase distribution of OPEs in the Lian River was significantly correlated with their hydrophobicity and solubility. Owing to their wide range of physicochemical properties, OPE congeners showed significant percentage differences in the Lian River water and sediments. Generally, OPEs in water reflect their dynamic real-time inputs, while those in sediment signify their accumulative deposition, which is another cause of their phase distribution disparities in the Lian River. The physicochemical parameters of OPEs first imposed negative and then positive influences on their dissolved phase-sediment distribution, indicating the involvement of both the adsorption of dissolved OPEs and the deposition of particle-bound OPEs.

Occurrence and carcinogenic potential of airborne PBDD/Fs and PCDD/Fs around a large-scale municipal solid waste incinerator: A long-term passive air sampling study.

Municipal solid waste incinerator (MSWI) not only is deemed one of the uppermost sources of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), but also produces substantial amount of polybrominated dibenzo-p-dioxins/furans (PBDD/Fs) owing to the existence of brominated flame retardants (BFRs) in the waste. So far, however, PBDD/Fs in the vicinal environments of MSWI and their associated risks remain rarely studied. Based on a one-year passive air sampling (PAS) scheme, we investigated airborne PBDD/Fs and PCDD/Fs around a large-scale MSWI that has been operated for multi-years. Both the concentrations of PBDD/Fs and PCDD/Fs showed spatially decreasing trends with the distance away from the MSWI, confirming the influence of the MSWI on the dioxin levels in its ambient air. But its influence on PBDD/Fs was less because PBDD/Fs exhibit lower volatility and therefore lower gaseous concentrations than PCDD/Fs. Compared to the existing global data of airborne PCDD/Fs and PBDD/Fs, our data of the MSWI vicinity were at medium levels, despite PAS samples only represent the concentrations of gaseous dioxins in theory. The seasonal data suggest that meteorological conditions exerted apparent influences over the concentrations and sources of airborne dioxins around the MSWI. As for PCDD/Fs, the MSWI was diagnosed as their uppermost source, followed by local traffic and volatilization/deposition. Whereas the top three PBDD/F sources were related to PBDEs, bromophenol/bromobenzene, and traffic vehicles, respectively. The bioassay-derived TEQs based on the aryl hydrocarbon receptor activation of airborne dioxins around the MSWI were one or two orders of magnitudes higher than their concentration-based TEQs, and the corresponding carcinogenic risks at some MSWI-vicinal sites exceeded the acceptable threshold proposed by the U. S. EPA (10-6 âˆ¼ 10-4) and deserve continuous attention.

Tuning of the electronic and photocatalytic properties of Janus WSiGeZ4 (Z = N, P, and As) monolayers via strain engineering.

Recently, MA2Z4 materials have received tremendous attention due to their amazing electronic, spintronic, and optoelectronic properties. In this work, we propose a class of 2D Janus materials WSiGeZ4 (Z = N, P, and As). It was found that their electronic and photocatalytic properties are sensitive to the change of the Z element. Biaxial strain results in an indirect-direct band gap transition in WSiGeN4 and a semiconductor-metal transition in WSiGeP4 and WSiGeAs4. Comprehensive studies demonstrate that these transitions as well as valley-contrasting physics are closely related to the crystal field induced orbital distribution. By taking into account several features of the excellent photocatalysts reported for water splitting, we predict three promising photocatalytic materials WSi2N4, WGe2N4, and WSiGeN4. Their optical and photocatalytic properties can be well modulated by applying biaxial strain. Our work not only provides a class of potential electronic and optoelectronic materials but also enriches the study of Janus MA2Z4 materials.

Mycorrhizal Effects on Growth and Expressions of Stress-Responsive Genes (aquaporins and SOSs) of Tomato under Salt Stress.

Environmentally friendly arbuscular mycorrhizal fungi (AMF) in the soil can alleviate host damage from abiotic stresses, but the underlying mechanisms are unclear. The objective of this study was to analyze the effects of an arbuscular mycorrhizal fungus, Paraglomus occultum, on plant growth, nitrogen balance index, and expressions of salt overly sensitive genes (SOSs), plasma membrane intrinsic protein genes (PIPs), and tonoplast intrinsic protein genes (TIPs) in leaves of tomato (Solanum lycopersicum L. var. Huapiqiu) seedlings grown in 0 and 150 mM NaCl stress. NaCl stress severely inhibited plant growth, but P. occultum inoculation significantly improved plant growth. NaCl stress also suppressed the chlorophyll index, accompanied by an increase in the flavonoid index, whereas inoculation with AMF significantly promoted the chlorophyll index as well as reduced the flavonoid index under NaCl conditions, thus leading to an increase in the nitrogen balance index in inoculated plants. NaCl stress regulated the expression of SlPIP1 and SlPIP2 genes in leaves, and five SlPIPs genes were up-regulated after P. occultum colonization under NaCl stress, along with the down-regulation of only SlPIP1;2. Both NaCl stress and P. occultum inoculation induced diverse expression patterns in SlTIPs, coupled with a greater number of up-regulated TIPs in inoculated versus uninoculated plants under NaCl stress. NaCl stress up-regulated SlSOS2 expressions of mycorrhizal and non-mycorrhizal plants, while P. occultum significantly up-regulated SlSOS1 expressions by 1.13- and 0.45-fold under non-NaCl and NaCl conditions, respectively. It was concluded that P. occultum inoculation enhanced the salt tolerance of the tomato, associated with the nutrient status and stress-responsive gene (aquaporins and SOS1) expressions.

Pharmacological Effects of Resveratrol in Intervertebral Disc Degeneration: A Literature Review.

Intervertebral disc degeneration (IDD) is a high incidence disease of musculoskeletal system that often leads to stenosis, instability, pain and even deformity of the spinal segments. IDD is an important cause of discogenic lower back pain and often leads to large economic burden to families and society. Currently, the treatment of IDD is aimed at alleviating symptoms rather than blocking or reversing pathological progression of the damaged intervertebral disc. Resveratrol (RSV) is a polyphenol phytoalexin first extracted from the Veratrum grandiflflorum O. Loes and can be found in various plants and red wine. Owing to the in-depth study of pharmacological mechanisms, the therapeutic potential of RSV in various diseases such as osteoarthritis, neurodegenerative diseases, cardiovascular diseases and diabetes have attracted the attention of many researchers. RSV has anti-apoptotic, anti-senescent, anti-inflammatory, anti-oxidative, and anabolic activities, which can prevent further degeneration of intervertebral disc cells and enhance their regeneration. With high safety and various biological functions, RSV might be a promising candidate for the treatment of IDD. This review summarizes the biological functions of RSV in the treatment of IDD and to facilitate further research.

Arbuscular mycorrhizal fungi and phosphorus supply accelerate main medicinal component production of Polygonum cuspidatum.

The medicinal plant Polygonum cuspidatum Sieb. Et Zucc is rich in stilbenes (e.g., polygonin and resveratrol) and anthraquinones (e.g., emodin) for the therapy of human diseases, while how to increase the growth and medicinal composition concentrations of P. cuspidatum has become an urgent issue. The aim of the present study was to evaluate the effects of inoculation with an arbuscular mycorrhizal (AM) fungus, Funneliformis mosseae, on plant growth, phosphorus (P) acquisition, medicinal component concentrations, and expressions of resveratrol synthesis-associated enzyme genes of P. cuspidatum at two P levels (0 M and 0.2 M). P supply (0.2 M) stimulated root AM fungal colonization rate. F. mosseae inoculation significantly improved growth performance (height, diameter, and biomass) and root morphology (diameter, length, and projected area), irrespectively of substrate P levels. P supply and F. mosseae distinctly increased soil acid and neutral phosphatase activities, as well as root P concentrations. P supply increased root physcion and resveratrol concentrations in inoculated and uninoculated plants, along with up-regulated expressions of PcCHS1, PcCRS1, PcRS11, and PcSTS. AM plants represented significantly higher root aloe-emodin, chrysophanol, emodin, physcion, polydatin, and resveratrol concentrations than non-AM plants irrespective of P levels, coupled with up-regulated expressions of PcCHS1, PcCHS2, PcRS11, PcRS, and PcSTS. It is concluded that 0.2 M P supply and F. mosseae inoculation promoted chrysophanol, physcion, polydatin, and resveratrol concentrations of P. cuspidatum, with the increase in resveratrol associated with up-regulated expressions of related genes.

Insight into the pharmacological effects of andrographolide in musculoskeletal disorders.

Andrographis paniculata (A. paniculata) is a traditional herbal medicine that has been widely used in Asian countries for hundreds of years. Andrographolide (AG) is a diterpene lactone extracted from A. paniculata. Owing to the in-depth study of pharmacological mechanisms, the therapeutic potential of AG, including its anti-inflammatory, anti-tumor, and immunoregulatory attributes, has attracted the attention of many researchers. Studies testing the therapeutic effects of AG have demonstrated desirable results in the treatment of a variety of clinical diseases. With high safety and various biological functions, AG might be a promising candidate for the treatment of musculoskeletal disorders. Here, we review all available literatures to summarize the pharmacological effects of AG and facilitate further researches on musculoskeletal diseases.

Ginsenoside Rg5 Inhibits Human Osteosarcoma Cell Proliferation and Induces Cell Apoptosis through PI3K/Akt/mTORC1-Related LC3 Autophagy Pathway.

The function and mechanism underlying the suppression of human osteosarcoma cells by ginsenoside-Rg5 (Rg5) was investigated in the present study. MG-63, HOS, and U2OS cell proliferation was determined by MTT assay after Rg5 treatment for 24 h. Rg5 inhibited human osteosarcoma cell proliferation effectively in a dose-dependent manner. The range of effective inhibitory concentrations was 160-1280 nM. Annexin V-FITC and PI double-staining assay revealed that Rg5 induced human osteosarcoma cell apoptosis. Western blotting, qRT-PCR, and FACS experiments revealed that Rg5 inhibited human osteosarcoma cells via caspase-3 activity which was related to the LC3-mediated autophagy pathway. Rg5 decreased the phosphorylation of PI3K, Akt, and mTORC1 activation. In contrast, LC3-mediated autophagy and caspase-3 activity increased significantly. A PI3K/AKT stimulator, IGF-1, reversed Rg5-induced cell autophagy and apoptosis in MG-63 cells. Collectively, the current study demonstrated that Rg5 induced human osteosarcoma cell apoptosis through the LC3-mediated autophagy pathway. Under physiological conditions, activation of PI3K/AKT/mTORC1 inhibits LC3 activity and caspase-3-related cell apoptosis. However, Rg5 activated LC3 activity by inhibiting the activation of PI3K/AKT/mTORC1. The present study indicated that Rg5 could be a promising candidate as a chemotherapeutic agent against human osteosarcoma.

Pharmacological activities of ginsenoside Rg5 (Review).

Ginseng, a perennial plant belonging to genus Panax, has been widely used in traditional herbal medicine in East Asia and North America. Ginsenosides are the most important pharmacological component of ginseng. Variabilities in attached positions, inner and outer residues and types of sugar moieties may be associated with the specific pharmacological activities of each ginsenoside. Ginsenoside Rg5 (Rg5) is a minor ginsenoside synthesized during ginseng steaming treatment that exhibits superior pharmaceutical activity compared with major ginsenosides. With high safety and various biological functions, Rg5 may act as a potential therapeutic candidate for diverse diseases. To date, there have been no systematic studies on the activity of Rg5. Therefore, in this review, all available literature was reviewed and discussed to facilitate further research on Rg5.

[Long-term Storage and Rapid Activity Recovery of ANAMMOX Granular Sludge].

At 4℃ and with no substrate, the activity recovery of ANAMMOX granular sludge was examined after 230 days of storage, and the effect of adding two organic carbon sources (glucose and sodium propionate) on the recovery was explored. After 230 days of long-term storage, the activity of ANAMMOX bacteria was 0.013 g·(g·d)-1, which was just 6.02% of the baseline, and the average particle size was 135.05 µm, which was 38.23% lower. The sludge disintegration, black in color. In the activity recovery stage, the R2 and R3 reactors added glucose and sodium propionate as organic carbon sources. The recovery results showed that after 15 days of recovery, the PN content of the R1, R2, and R3 reactors reached 126.30, 188.86, and 168.82 mg·g-1, respectively, and the activity of the ANAMMOX bacteria was improved, reaching 0.145, 0.185, and 0.126 g·(g·d)-1, respectively. The R2 reactor with glucose as the organic carbon source had the highest ANAMMOX bacteria activity, which recovered 85.65% before preservation, and the total nitrogen removal rate reached 81.61%. On the 20th day, the particle sizes of the ANAMMOX granular sludge in the R1, R2, and R3 reactors were 289.81, 359.66, and 314.37 µm, respectively, indicating that the long-term preservation of ANAMMOX granular sludge is not an insurmountable problem. Furthermore, adding glucose during the recovery phase can not only effectively increase the EPS content and promote particle growth and adhesion, but also enrich the reaction pathways of ANAMMOX, enhancing recovery rates.

Strain-dependent optical properties of the novel monolayer group-IV dichalcogenides SiS2semiconductor: a first-principles study.

We studied the structural, electronic, and optical characters of SiS2, a new type of group IV-VI two-dimensional semiconductor, in this article. We focused on monolayer SiS2and its characteristic changes when different strains are applied on it. Results reveal that the monolayer SiS2is dynamically stable when no strain is applied. In terms of electronic properties, it remains a semiconductor under applied strain within the range from -10% to 10%. Besides, its indirect band-gap is altered regularly after applying a strain, whereas different strains lead to various changing trends. As for its optical properties, it exhibits remarkable transparency for infrared and most visible light. Its main absorption and reflection regions lie in the blue and ultraviolet areas. The applied uniaxial strain causes its different optical properties along the armchair direction and zigzag direction. Moreover, the tensile strain could tune its optical properties more effectively than the compressive strain. When different strains are applied, the major changes are in blue and ultraviolet regions, but only minor changes can be found in infrared and visible regions. So its optical properties reveal good stability in infrared and visible regions. Therefore, SiS2has a promising prospect in nano-electronic and nano-photoelectric devices.

Three-point Method to Guide the Tibial Resection and Component Placing in Total Knee Arthroplasty.

OBJECTIVE: To introduce a three-point method combining the midpoint of the posterior cruciate ligament (PCL), the midsulcus of the tibial spines, and the midpoint of the anterior cruciate ligament (ACL) to determine appropriate tibial resection and component placing during TKA and to compare this method with Insall's 1/3 method. METHODS: A consecutive series of 128 knees that underwent TKA from January 2015 to August 2018 were analyzed. In one group (64 knees), the medial 1/3 of tibial tubercle (the Insall's traditional method) was used for tibial component alignment. In the other group (64 knees), the three-point line connecting the midpoint of the PCL, the midpoint of the tibial spines, and the midpoint of the ACL was used for tibial component alignment. Both groups used the anterior tibial tendon as the distal reference for tibial resection. The coronal alignment error of the tibial component was determined by the angle between the line parallel to the tibial component platform and the tibial mechanical axis measured on postoperative radiograph. The axial rotation error of the femoral or tibial component was the intersection angle between the transepicondylar axis (TEA) and a line tangent to the posterior edge of the femoral or tibial component measured on CT. The coronal and axial alignment errors were compared between the two groups. RESULTS: The average coronal alignment error of the tibial component in the three-point method group was 0.2° ± 1.4° versus - 0.9° ± 1.8°in the Insall's 1/3 method group (P < 0.001), and the mean absolute value in the three-point method group reduced by 37.3% compared to Insall's traditional method group. The average axial rotation error of the femoral component was 0.2° ± 1.2° in the three-point method group versus - 1.1° ± 1.7° in the Insall's 1/3 method group (P < 0.001), and the mean absolute value in three-point method group decreased by 43.9% compared to Insall's traditional method group. The average axial rotation error of the tibial component was 0.4° ± 1.4° versus - 1.4° ± 1.8° in the Insall's 1/3 method group (P < 0.001), and the mean absolute value in the three-point method group reduced by 35.5% compared to the Insall's traditional method group. The rates of rotation outliers were significantly lower in the three-point method group (P < 0.05). CONCLUSION: The line connecting the midpoint of the PCL, the midsulcus of the tibial spines, and the midpoint of the ACL could be used as the reference for the tibial resection and component placing. This method appears to be more accurate than Insall's 1/3 method. The results of this study provide a candidate method for component orientation with little error.

Dimensional Changes of Lumbar Intervertebral Foramen in Direct Anterior Approach-Specific Hyperextension Supine Position.

OBJECTIVE: To investigate the changes in the lumbar intervertebral foramen (LIVF) dimensions from neutral supine to direct anterior approach (DAA)-specific hyperextension supine position through a standardized three-dimensional (3D) reconstruction computerized tomography (CT) method. METHODS: A total of 35 healthy volunteers (18 men and 17 women) were included in this retrospective study. The mean age of enrolled subjects was 28.9 ± 5.0 years. In September 2018, all the individuals underwent a 3D CT scan of the lumbar spine in neutral and 30° hyperextension supine positions, which mimicked the patient's position in DAA total hip arthroplasty (THA). The dimensions of the LIVF, including foraminal area, height, and width, were measured on 3D reconstructed CT models at all lumbar foraminal levels. Foraminal area was defined as the area bounded by the adjacent superior and inferior vertebral pedicles, the posterosuperior boundary of the inferior vertebral body, the surface of the intervertebral disc posteriorly, the posteroinferior boundary of the superior vertebral body, and the surface of the ligamentum flavum anteriorly. Foraminal height was defined as the longest distance between the border of the superior and the inferior pedicle. Foraminal width was defined as the shortest distance between the posteroinferior edge of the superior vertebrae and the opposing boundary. Subgroup analysis and multiple linear regression were used to evaluate the relationship between percentage changes of the LIVF dimensions and side, sex, and age. RESULTS: The LIVF dimensions varied significantly between the two positions at all levels (P < 0.05). From neutral to hyperextension supine position, the foraminal area reduced by 20.1% at lumbar 1-2 (L1-2 ), 22.6% at L2-3 , 19.9% at L3-4 , 18.1% at L4-5 , and 12.0% at lumbar 5-sacral 1 (L5 -S1 ) level, respectively; the foraminal height reduced by 9.5% at L1-2 , 10.5% at L2-3 , 9.5% at L3-4 , 9.6% at L4-5 , and 6.1% at L5 -S1 level, respectively; the foraminal width reduced by 12.8% at L1-2 , 14.5% at L2-3 , 13.0% at L3-4 , 10.4% at L4-5 , and 8.4% at L5 -S1 level, respectively. The changes in LIVF dimensions were biggest at L2-3 level and smallest at L5 -S1 level. Subgroup analysis showed that there were no significant differences in the percentage changes of LIVF dimensions between the sexes and sides (P > 0.05). Multiple linear analysis showed that the percentage changes of LIVF dimensions were not related to side, sex, and age (P > 0.05). CONCLUSION: The dimensions of the LIVF showed significant decrease at all levels in the DAA-specific hyperextension supine position compared with the neutral supine position, and the percentage changes of LIVF dimensions were not influenced by side, sex, and age.

Bioguided Isolation and Structure Identification of Acetylcholinesterase Enzyme Inhibitors from Drynariae Rhizome.

Drynariae Rhizome, widely distributed in southern China, was clinically used as a traditional treatment for cognitive disfunction, such as Alzheimer's disease (AD). The aim of our work was to evaluate the AChE inhibition activities of extracts of Drynariae Rhizome and pure compounds using a bioguided fractionation procedure. The classical approach for screening potential AChE inhibitors was developed by Ellman. However, the background color of compounds or herb extracts remained uncertain and frequently interfered with the detection of the secondary reaction, thereby easily yielding false positive or false negative results. Here, a high-throughput assay monitoring the transformation of iodized choline from iodized acetylcholine catalyzed by AChE was established based on UPLC-MS/MS. The bioguided fractionation of the extract using this method resulted in the isolation of eight AChE inhibitory flavonoids, including naringenin, eriodictyol, kaempferol, luteolin, astragalin, luteolin-7-O-ß-D-glucoside, naringin, and neoeriocitrin, with the IC50 values of 3.81 ± 0.21 µM, 7.19 ± 0.62 µM, 11.09 ± 1.02 µM, 17.26 ± 0.23 µM, 18.24 ± 2.33 µM, 17.13 ± 1.02 µM, 26.4 ± 1.17 µM, and 22.49 ± 1.25 µM. It is assumed that the identified flavonoids contribute to the AChE inhibition activity of Drynariae Rhizome. These results are in agreement with the traditional uses of Drynariae Rhizome for AD.

Topological phase transition and tunable electronic properties of hydrogenated bismuthene: from single-layer to double-layer.

Planar bismuthene grown on SiC substrate provides a promising candidate to engineer van der Waals double-layer (DL) made of two dimensional (2D) topological insulators. We perform systematical calculations in DL hydrogenated bismuthene (H-Bi) that can be used to simulate the experimentally grown planar bismuthene to explore realizable 2D topological insulator van der Waals DL. Two possible geometry configurations of AA- and AB-stacked DL H-Bi are investigated. Due to pseudo Jahn-Teller effect, AB-stacked DL H-Bi has a strong interlayer coupling interaction and shows buckled lattice. Particularly, both AA- and AB-stacked DL H-Bi are topologically trivial rather than topologically nontrivial. The physical origin of the trivial topology is clarified by analyzing orbital composition. We discuss how the electronic properties are modified by interlayer coupling, external strain, and metal atom intercalation. It is also found that, for AB-stacked DL H-Bi, metal atom intercalation gives rise to novel multiple Rashba splitting near the valence band top, which is expected to manipulate the same spin in different planar bismuthene layers. Our results present various and tunable electronic properties of van der Waals DL H-Bi and allow for probing into multiple Rashba effect in 2D inversion-asymmetric topological insulators.

Strain-tunable electronic and optical properties of novel anisotropic green phosphorene: a first-principles study.

The effect of in-layer strain on the optical and electrical properties of monolayer green phosphorene, a new anisotropic two-dimensional (2D) material, has been systematically studied. The studied strain includes in-layer uniaxial strain and biaxial strain. Green phosphorene can be viewed as a combination of black and blue phosphorene segments in regular order. We adopt the HSE06 method to correct the calculated results. The results reveal that, firstly, strain-free monolayer green phosphorene is a stable direct band gap 2D semiconductor with the anisotropic optical property. The transmittance of infrared and visible light along the zigzag direction is better than that along the armchair direction. However, the transmittance of the UV-light along the armchair direction is better than that along the zigzag direction. Secondly, the optical properties, such as the absorption coefficient and reflectivity, along armchair and zigzag direction respond very differently to the various applied strains. As for the electronic properties, the band gap exhibits different changing trends by applying either in-layer biaxial strain or uniaxial strain in different directions. Besides, the near-band-edge electronic orbitals exhibit different bond nature in different directions. These results suggest that green phosphorene shows strong anisotropy in electronic and optical properties. By calculating and comparing the energies of near-band-edge states after applying different strains on green phosphorene, the reason for the anisotropy of the new 2D material is analyzed. This study implies that the electronic and optical properties of green phosphorene, a stable direct band gap anisotropic semiconductor, could be efficiently tuned by in-layer biaxial or uniaxial strain. Therefore, green phosphorene can be used in linear polarizers and other anisotropic photoelectric devices.

Topologically nontrivial phase and tunable Rashba effect in half-oxidized bismuthene.

Bismuth based (Bi-based) materials exhibit promising potential for the study of two-dimensional (2D) topological insulators or quantum spin Hall (QSH) insulators due to their intrinsic strong spin-orbit coupling (SOC). Herein, we theoretically propose a new inversion-asymmetry topological phase with tunable Rashba effect in a 2D bismuthene monolayer, which is driven by the sublattices half-oxidation (SHO). The nontrivial topology is identified by the SHO induced p-p band inversion at the Γ point, the Z2 topological number, and the metallic edge states. Interestingly, the SOC opens a band gap as large as 0.26 eV at Γ, which is twice as large as that of the freestanding bismuthene monolayer, revealing a predominant contribution of the orbital filtering effect. Inversion-symmetry breaking leads to a substantial Rashba constant of 11.5 eV Å near the valence band top, which is about twice as large as that of the freestanding bismuthene monolayer due to the SHO effect. In particular, the topological insulator-to-topological semimetal phase-transition and the tunable Rashba effect were achieved by exerting a moderate strain. We demonstrate that 3% stretching is the most desirable strain to obtain superior properties. Hexagonal boron nitrogen (h-BN) is proposed to serve as a suitable substrate for SHO-Bi in practical applications. Our findings not only provide a new route to engineering a 2D inversion-asymmetry topological insulator but also represent a significant advance in the exploration of 2D Bi-based topological materials.